INTERFACE SPECIFICATIONS
SeaBat 8160
Operator‟s Manual
Page 73
October 6, 2011
Version 5
C.3.1.44 Head Tilt
This message sets the head tilt angle.
Syntax:
*TILT,N<CR><LF>
Parameters:
N = Tilt angle from -180
to +180
Example:
*TILT,-1<CR><LF>
This example sets the head tilt angle to -1
.
C.3.1.45 Time
This message sets the processor time (not used for time stamping any data).
Syntax:
*TIME,HH,MM,SS<CR><LF>
Parameters:
HH = Hours (0
– 23)
MM = Minutes (0
– 59)
SS = Seconds (0
– 59)
Example:
*TIME,13,42,1<CR><LF>
The example sets the processor time to 13:42:01.
C.3.1.46 UTC-Time Baud Rate
This message controls the IN baud rate for serial port 1. The port IN receives
UTC-time data.
Syntax:
*TMBR,N<CR><LF>
Parameters:
N = Baud rate.
Valid rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200.
Example:
*TMBR,19200<CR><LF>
This message sets the In baud rate on Serial Port 1 to 19200.
