SYSTEM OPERATION
SeaBat 8160
Operator‟s Manual
Page 34
October 6, 2011
Version 5
NOTE
The increments for range, depth, and head tilt settings change depending on
the current range value. The breakdown is as follows:
Up to 100m:
0.1 meter increments
100m to 1,000m: 1.0 meter increments
Beyond 1,000m: 10.0 meter increments
When selecting a filter value, use the middle track ball button to increase the
increment rate by a factor of ten.
When filter values are set via a remote source, the increments can be reduced
to 1/10 of the increments above.
5.8 Menu Off
Selecting this option will collapse the Menu Block (see
) into a single
line. The Menu Block may be re-activated by clicking on the line.
5.9 Built-In Test Environment (BITE) Display
The Built-In Test Environment (BITE) display (see
) shows diagnostic
and configuration information with regards to the current sonar session.
