Reson SeaBat 7125 SV2, Operator'S Manual

Page: 50 / 212

SYSTEM CONFIGURATION
SeaBat 7125 SV2 Operator‟s Manual
Page 34 July 25, 2011
Version 3
3. Browse to the location where you want the file saved and enter a file name.
The file extension is automatically set to (*.cfg).
4. Click the Save button.
4.2.10 Edit Auto Pilot
6
Settings
The data contained within the look-up table is specific to a sonar type and may be
manually edited. These settings are specified by the operator prior to initiating Auto Pilot
mode (see
section 5.3.8 Change Modes ). A default set of values are included in the
table which may require modification based on the specific conditions encountered.
To modify the default parameters:
1. Select Edit Auto Pilot Settings from the Configuration menu.
2. Make changes by using the arrow buttons next to the desired setting:
a. Press one of the arrow buttons, and
b. Drag the pointer to pull the appearing slider up or down to modify the
setting.
3. Click Apply to carry out the changes. (Clicking OK will also close the dialog).
6
Available with the Efficiency feature package (see Table 19 ).