Reson SeaBat 7125 SV2, Operator'S Manual

Page: 102 / 212

SYSTEM OPERATION
SeaBat 7125 SV2 Operator‟s Manual
Page 86 July 25, 2011
Version 3
5.7.6.2 Recording Status
The Recording Status section of the Screen Recording tab provides information on the
current recording:
File Name: The name of the current file. The file name is automatically
generated using this naming convention: YYYYMMDD_HHMMSS.avi. The file
name is shown only during recording.
Storage Directory: The storage location of the current file. To change this
location, go to the Data Recording tab and click the Browse button to select
the folder where the recorded files should be saved.
5.7.6.3 Play Back Recorded Video Data
You can use any media player to play back .avi files.
5.7.7 I/O Module Setup
See section 4.5 I/O Module Configuration .
5.7.8 Data Playback
The Data Playback tab is hidden when the SeaBat is in
Manual mode. To display the Data Playback tab, select
Playback from the Mode drop-down menu (see
section
5.3.8 above ).
The Data Playback tab is divided into three general sections:
Playback Control
Advanced
Playback Status
Figure 26: Sample of Data Playback Tab
5.7.8.1 Playback Control
The Playback Control section of the Data Playback tab allows you to start and stop the
playback process. Click the Select File button to select the file to play back, and then
click the Play button to start playback. The Stop button will stop the playback.