Reson SeaBat 7125 ROV, Operator'S Manual

Page: 90 / 200

SYSTEM OPERATION
SeaBat 7125 ROV Operator‟s Manual
Page 74 May 30, 2011
Version 3
Line Color: Change the color of the frames and gridlines in both the sonar
image and A-scan displays.
Text Color: Change the color of the text in both the sonar image and A-scan
displays.
Display Format: Switch the sonar image display between Wedge and Beam
(B-scan) modes.
Label Format: Change the labels in both the sonar image and A-scan
displays to reflect units of range (in meters), time (in seconds), or samples.
Grid Lines: Activate or deactivate grid lines on the Primary Display.
o
All: Show the frame around the sonar image, as well as the selected
units of measure.
o
Frame: Hide the units of measure, leaving only the frame around the
sonar image.
o
None: Hide all frames.
o
Beam Select: Hide the frame around the sonar image and the units of
measure. Show the frame around the selected beam.
Selected Beam: View the number of the currently selected beam in this field,
or change the beam selection by either entering a beam number or clicking
the arrow buttons to cycle through the beams.
5.7.5 Data Recording
The Data Recording tab is divided into three general sections:
Recording Control
Advanced
Recording Status
Figure 25: Sample of Data Recording Tab
5.7.5.1 Recording Control
The Recording Control section of the Data Recording tab allows you to start and stop the
data recording process. Click the Record button to start recording and the Stop button to
stop recording.