Reson SeaBat 7125 ROV, Operator'S Manual

Page: 69 / 200

SYSTEM OPERATION
SeaBat 7125 ROV Operator‟s Manual
Page 53 May 30, 2011
Version 3
Figure 10: B-Scan Display
5.3.2 A-Scan Display
On the left side of the Primary Display (see Figure 9 ), next to the sonar wedge (or B-
scan) display, is the A-scan display. This display allows the operator to view the details
of a single beam or group of beams.
The default axis values are range vs. magnitude. Magnitude is scaled from minimum to
maximum. Range labels can be changed to Time and Sample Number using the Label
Format drop-down menu on the Primary Display Settings tab (see
section 5.7.4 below ).
5.3.2.1 Available Displays
Place the pointer over the A-scan display panel and right-click to switch between the
available displays.
NOTE
All displays may not be available, depending on the type of data being received.