Reson SeaBat 7125 ROV, Operator'S Manual

Page: 193 / 200

AVAILABLE SEABAT 7125 CONFIGURATIONS
SeaBat 7125 ROV Operator‟s Manual
Page 177 May 30, 2011
Version 3
APPENDIX E AVAILABLE SEABAT 7125 CONFIGURATIONS
E.1 Configurations
The SeaBat 7125 is available in various single- or dual-frequency configurations:
Table 21: Available Configurations
System Frequency
(kHz) Depth rating
(meters)
7125 SV
– single frequency
400 50
7125 SV
– dual frequency
200/400 50
7125 ROV
– single frequency
400 6000
7125 ROV
– dual frequency
200/400 6000
7125 AUV
– single frequency
400 Optional 6000
7125 AUV
– dual frequency
200/400 Optional 6000
NOTE
The single-frequency systems are 400kHz only and dual frequency are 200/400khz.
There is no 200kHz only configuration.
E.1.1 7125 SV Configuration
The SeaBat 7125 SV configuration is for mounting on a surface vessel and designed
with ease of installation and operation as a high priority.
E.1.2 7125 ROV Configuration
The SeaBat 7125 ROV configuration is for deep-water use on a remotely operated
vehicle. The link control unit is housed within a titanium bottle providing the system with
a depth rating of 6000 meters.
E.1.3 7125 AUV Configuration
The SeaBat 7125 AUV configuration is for mounting on an autonomous underwater
vehicle with its Integrated Control and Processor Unit of a standard depth rating of 400
meters (optional 6000m depth-rated pressure housing available). The system provides
onboard data processing and logging.