en
53
Installation
Indications,
functions and options
Messages
Commissioning
Operation and function
SDIS
Display of starting time
Display range: 00:00 … 24:00 (hh:mm)
If the thermal disinfection option (OTD) is activated and a starting delay time has
been adjusted, the adjusted starting time is displayed as SDIS (flashing).
DDIS
Display of disinfection period
Display range: 00:00 … 24:00 (hh:mm)
If the thermal disinfection option (OTD) is activated and the disinfection period
is in progress, the remaining time is displayed as CDIS (in hours and minutes),
counting backwards.
Display of time
TIME
Indicates the current clock time.
Î
In order to adjust the hours, press button 3 for approx. 2 s.
Î
Set the hours by pressing buttons 1 and 2.
Î
In order to adjust the minutes, press button 3.
Î
Set the minutes by pressing buttons 1 and 2.
Î
In order to save the adjustments, press button 3.
Operating hours counter
h P / h P1 / h P2
Operating hours counter
Display channel
The operating hours counter accumulates the operating hours of the correspond-
ing relays (h P / h P1 / h P2). Full hours are displayed.
The accumulated operating hours can be set back to zero. As soon as an operating
hours channel is selected, the symbol
Ⓢ
is displayed.
Î
In order to access the reset mode of the counter, press button 3 for approx. 2 s.
Ⓢ
starts flashing and the operating hours will be set back to zero.
Î
In order to finish the reset process, press button 3.
In order to interrupt the reset process, do not press any button for about 5 s. The
display returns to the display mode.