resideo Braukmann KS30E-30, Installation Instructions Manual

Page: 3 / 86

GB
MU1H-1420 GE23 R0420 3
1.5 Options
For Options visit homecomfort.resideo.com/europe
2 Quick Operation
2.1 Display and control elements
Note: In the programming mode the respective >target value<
flash.
2.2 Standard settings
On first powering up the softener the digits of the display will
flash while the valve rotates to service position.
The valve can be heard moving and this can take a few
minutes.
On locating service position the display will prompt the
installer to set the time.
Go to section to set the time and hardness settings.
2.3 Programming procedure
1. Setting the time of day
The first two digits (00) of the display will flash prompting the
installer to set the time.
Nominal capacity
(EN 14743) :
KS30E-30, KS30I-30
KS30E-60, KS30I-60
KS30I-80
30 m
³ x °dH/ 54 °fH/
540 ppm
60 m
³ x °dH/107 °fH/
1070 ppm
85 m
³ x °dH/151 °fH/
1510 ppm
Capacity salt reservoir:
KS30E-30, KS30I-30
KS30E-60, KS30I-60
KS30I-80
12 kg
25 kg
25 kg
Max. salt consumption per
regeneration:
KS30E-30, KS30I-30
KS30E-60, KS30I-60
KS30I-80
1.5 kg
2.5 kg
3 kg
Max. water consumption per
regeneration:
KS30E-30, KS30I-30
KS30E-60, KS30I-60
KS30I-80
85 l
125 l
145 l
Protection class: IP51
Dimensions:
Height
KS30E-30, KS30I-30
KS30E-60, KS30I-60,
KS30I-80
Width
KS30E-30, KS30I-30
KS30E-60, KS30I-60,
KS30I-80
Depth
KS30E-30, KS30I-30
KS30E-60, KS30I-60,
KS30I-80
536 mm
808 mm
808 mm
270 mm
270 mm
270 mm
483 mm
483
483 mm
Height input/output-h:
KS30E-30, KS30I-30
KS30E-60, KS30I-60
KS30I-80
400 mm
670 mm
670 mm
Operating weight, approx.:
KS30E-30, KS30I-30
KS30E-60, KS30I-60,
KS30I-80
40 kg
65 kg
70 kg
Disinfection unit:
KS30E-30, KS30E-60
KS30I-30, KS30I-60,
KS30I-80
-
yes
yes
The display shows:
the current time
the remaining capacity in
20% bars
[UP] [DOWN] [SET/
RETURN]
[RECHARGE]
= Moves cursor changes
entries
= Confirms
entries
= Programming
recharge
tonight
KaltecSoft