25 m
When connected, the blue LED on the Professional
Bluetooth
Audio Receiver will flash slowly, returning to a constant blue LED
whenever the connection is lost. Refer to website
http://www.resi-linx.com
for separate instructions on how to conveniently rename
your
Bluetooth
resi-linx device ID to identify different zones eg. kitchen, living, outdoor etc.
NB. When connected adjust Treble, Bass & Level controls on the Professional Bluetooth Audio Receiver to suit your personal preference.
Disconnecting/Changing Connected Device
If you want to switch from your iPad, iPhone, iPod touch or other
Bluetooth
enabled device to another, follow these steps:
1. Access the
Bluetooth
settings (as above) and turn the
Bluetooth
function to ‘OFF’ of the device.
2. The Professional
Bluetooth
Audio Receiver can now be connected to a different device.
3. Follow the directions in “Initial pairing to your Professional
Bluetooth
Audio Receiver” to connect a different device.
Reconnecting Your Device
If you move out of range** (>25m) or turn off the Bluetooth function on your iPad, iPhone, iPod touch or other Bluetooth enabled
device, the Professional Bluetooth Audio Receiver will disconnect. To reconnect, simply access the Bluetooth
settings on your device,
ensuring Bluetooth function is set to ‘ON’ and select the resi-linx device ID.
** The communication range quoted is calculated based on an unobstructed line of sight test under optimum conditions. Actual range will vary depending on conditions, and is often less than the
maximum possible. Your actual range will be limited by several factors including, but not limited to, electromagnetic interference and obstructions
Hardware Connection
1. Connect one 3.5mm end of the audio lead to the jack of the Professional
Bluetooth
Audio Receiver .
2. Connect the RCA end of the audio lead to the input on your home stereo system.
3. Connect the antenna to the Professional
Bluetooth
Audio Receiver .
4. Connect the mini USB to USB lead to the Professional
Bluetooth
Audio Receiver
and the AC power adapter . Plug the AC adapter into a wall power outlet.
5. The LED will turn on (constant blue light) indicating the Receiver is powered and is now
ready to be paired to your iPad, iPhone, iPod touch or other
Bluetooth
enabled device.
Initial pairing to your Professional Bluetooth Audio Receiver
RL-BT120
INSTALLATION MANUAL
linx-Audio
Bluetooth
®
Range
Professional Bluetooth Audio Receiver
www.resi-linx.com
®
B
C
D
A
D
Power adapter USB output
Mini USB to USB lead
3.5mm to RCA audio lead
Professional
Bluetooth
Audio Receiver
C
A
B
B
C
D
D
A
Step 1
From your iPad,
iPhone or iPod
touch home page
select ‘Settings’
resi-linx
Step 2
Inside Settings,
select ‘General’
Step 3
Inside General,
select ‘Bluetooth’
Step 4
Turn Bluetooth
‘ON’ and search for
devices. Select the
‘resi-linx’ device ID
WARRANTY
Australian Audio Imports Pty Ltd states that the warrant that the customer can rely on is that provided
by the manufacturer. In the event of any warranty claim please contact us and we will forward it to the
manufacturer. The manufacturer will then determine the extent of their liability. This expressly negates, to
the extent possible by Australian law, any warranty reliance on Australian Audio Imports Pty Ltd.
Australian Audio Imports Pty Ltd ABN: 34 005 281
All trademarks and trade names are those of their respective
owners. The
Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Australian Audio Imports Pty Ltd is under license.
Australian Audio Imports
C
25 m
D
* Example provided is to pair to an iPad or iPhone only. Other Bluetooth enabled devices such as your laptop may require a pin code to pair eg. default pin code ‘0000’.
Please refer to equipment user manual for more information.
N15275
