WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly
can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with
caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result
in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision.
This product is NOT a
toy,Adult supervision
is required for those
under 14 years old.
WARNING!
Apply glue
The winglet sticky on the wing.
Apply glue
Load the camera into the head space
1
2
3
4
9VOUT
GND
5VOUT
GND
GND
POWIN+
JP2
JP1
GND
GND
+
AIL-IN
ELE-IN
RUD-IN
AUX
AIL-OUT
ELE-OUT
RUD-OUT
REPTILE-TECH
-
Receiver
The power supply panel is installed
The receiver is fitted into the rear
Apply glue
fuselage compartment.
the middle of the fuselage.
The battery board is mounted in the middle of the fuselage.
Apply glue
The front engine compartment covers
two specifications for interchange
Wood motor seat
Carbon fiber motor seat
A
B
B
Front
Front
Apply glue
Installing the A hatch, use a magnet.
The carbon fiber motor seat and the
wood motor seat are glued to the
Schematic diagram of servo line
Carbon tube links for airframe and wing.
The airframe and the wing are locked by the Velcro.
1
2
3
4
9VOUT
GND
5VOUT
GND
GND
POWIN+
JP2
JP1
GND
GND
+
AIL-IN
ELE-IN
RUD-IN
AUX
AIL-OUT
ELE-OUT
RUD-OUT
REPTILE-TECH
-
Front
Carbon fiber tube
Carbon fiber rod
connection.
A
m3*5 Screw
B
Camera
Video transmitter
Not included
Not included
Battery mounting
plate
Not included
CG:145mm
The front airframe is 4mm carbon
bar strengthened, and the rear
airframe is 6mm carbon tube reinforced.
tail of the airframe.
Installing the B hatch, use the M3
screw to reinforce.
and secure it.
in the lower equipment compartment of
The rear cover and the body with glue.
use and can be fitted with video recorders.
m2*5 Screw
Power board
CG:145mm
The airframe and the wing are locked
by the Velcro.
