80
4.4.4 Options 2
Here various options can be activated
In this menu you can select the options you need in the current program, the selected function
lights up when activated.
If not selected, the function buttons on operator menu will not function.
Label 1
= Process with filler, (synchronised)
Label 2
= Process with labeler, (synchronised)
E.L.S 1
= Process with ELS labeler, (synchronised)
E.L.S 2
= Process with ELS labeler, (synchronised)
Confirmation station
= Process with confirmation station (inlay support device)
Temperature Check
= Temperature control on / off (machine will not run if the
temperature is out of range)
Close die early
= Die set will close earlier before end of transport distance, or the
die set close at the end of transport.
Out of film detection
= If selected machine will stop when running out of film.
Dansensor
= Process with Dansensor gas-analyser.
Strip Hoover
= If selected strip trim bin is active during process.
Film detection
= If selected end of film detection can be activated in the operator
menu.
Figure 4.23 Options 2
