Renzetti Traveler 2200 Series
Clouser Cam Travele
r
Model #C2102 C-Clamp Vise
Note:
Cam
C2102
Description
End Cap
Crank Arm (Trav.)
Rotary Tension Screw
Clouser rotary shaft
Nylon Flat Washer
Rotary Head (Trav.)
C2102 Parts List
12
10
11
9
290-40271
290-40842
110-00005
8
7
5
6
4
Primary Knob
290-40840
Part No.
290-40269
120-01658
3
2
1
Item
Vise Assembly
1
1
1
25
23
24
22
19
20
21
17
18
16
Item
1
2
1
Qty
Part No.
13
14
15
Rotate
23
Detail 1
22
24
21
Made in the U.S.A. 10/15
25
O-Ring
17
Ball Bearing
2
Description
1
Qty
20
18
19
Lubricate all threads and parts as needed.
Patent #: 5,169,079;6,564,494132;
R#:2,551,441; 2,567,674 TM#: 2,535,148
2
1
16
10
This screw is for setting the
drag. It is not intended to
lock the rotary shaft. Do
not overtighten
4
3
5
2
6
7
15
8
14
9
13
12
11
C-Clamp frame
assembly
Stem
Rotary shaft
Traveler C-Clamp
Lock knob
Cradle support
tension screw
Cradle
Cradle arm
Center line
Cradle support
Cradle arm lock screw
Cradle support collar
Lube O-Ring
Jaw O-Ring
130-03016
Cradle Arm Lock Screw
Cradle Support Collar Assembly
Cradle Support Tens. Screw
1
1
120-01628
110-00006
130-03038
290-40263
110-00003
250-40000
251-40057
290-40264
290-40255
120-01147
Flat washer
Lock knob
Jaw Spring
Cradle Assembly
C-Clamp Frame Assembly
C-Clamp Stem
1
1
1
1
1
1
1
1
Cradle Support
1
1
120-01455
Jaw Mounting Screw
1
110-00042
Jaw Adjusting Screw
1
Primary Jaw
Secondary Jaw
1
Set
130-03018
290-40337
290-40336
290-40313
130-03024
1
220-22030
We urge you to take time to familiarize yourself with the mechanics of your
traveler vise. Rotary tying can be easier and more productive. See tips
(opposite page). Please return your warranty card to validate your warranty.
Your vise has been assembled and lubricated at the factory. All you have to do is assemble the
bobbin cradle and attach the vise to the stem. The jaws on your vise have been black oxide
coated and then oiled. After use they should be coated with oil or rust inhibitor such as WD-40
to prevent rust or oxidation caused by acidity in your fingers. Any light general purpose grease,
preferably silicone grease, can be applied on any moving parts or o-ring *.
Please note, our warranty does not cover rust damage.
1. Slide the cradle support collar onto the c-clamp stem with the flat side up as
shown in the diagram.
2. Slide the cradle support onto the c-clamp stem as shown. Use the cradle
support tension screw to add drag to the cradle support as needed.
3. Attach the vise to the c-clamp stem and tighten. Be careful not to cross the
threads when attaching the vise.
4. Slide the cradle arm into the hole in the cradle support and tighten the
cradle arm lock screw to secure the cradle arm. If the cradle is not in a
comfortable position hold the cradle arm firmly and rotate the cradle to the
desired position. See detail 1.
5. Slide the cradle support collar and cradle support up or down so that the
cradle is on or just below the center line of the rotary shaft.
O-ring groove
