25
en
Fixscreen
®
Minimal - Renovation IM 1
3.4 • Securing the box to the side guiding channel
The box is fixed on the side guiding channel with adjustable mounting pins. These are already
pre-mounted in the side guiding channel. Unscrew the mounting pin with an Allen key 2.5, and
slide the mounting pin into the box until the arrow on the pin is fully concealed. Now retighten it
and tighten the adjusting screw
➀
that is ready in the box. The box is now secured.
3.5 • Snap-fitting the side guiding channels in place
• Side guiding channel XS
Slide the intermediate profile
of the side guiding channel
into the fixed profile as
shown in the drawing.
Then snap the intermediate
profile into place by pushing
at the position where the
clips are visible.
Check to ensure that the
intermediate profile has
correctly snap-fitted into
place.
1
2
3
When snap-fitting the side guiding channels, take care not to damage the screen
zip.
➀
