Page 26 Twist-A-Mini
™
Manual
Tips and troubleshooting
Choosing the right speed
✔
Remember, speed is relevant to what you are etching, grinding or
polishing .
✔
It’s easy to increase speed, so if in doubt, start slow .
✔
Using the right speed will protect and prolong the life of Twist-A-Mini
™
bits . Applying too much pressure or speed will raise the temperature
of the bit and shorten its life .
✔
Listen to Twist-A-Mini
™
and how it is coping with the load when
deciding to change speed .
✔
The Twist-A-Bits workshop guide lists the recommended speeds for
each bit . These are guides only and must be adjusted according to
the characteristics of the material being cut .
Tips
✔
When glass etching with the Twist-A-Flex
™
, consider resting the item
on a wheat bag to provide a steady work platform .
Tips and troubleshooting
