![Renkforce FDM 3D Printer Pro 6+ Quick Start Manual Download Page 1](http://html1.mh-extra.com/html/renkforce/fdm-3d-printer-pro-6/fdm-3d-printer-pro-6_quick-start-manual_1441502001.webp)
Insert the print bed and magnetic mat.
3
4
Remove the styrofoam pads
5
6
1. Install the spool holder.
2. Slide the filament spool onto the holder.
1. Insert the filament tube in the feeder.
2. Insert the filament tube into the extruder.
7
System
Tool
8
1. Connect the mains cable to the power inlet on the printer.
2. Flip the power switch into the position
I
to switch on. The display lights up.
Quick Start Guide
FDM 3D Printer Pro 6+
Item No. 2583518
Read the safety instructions supplied
with the product before using
1
Set printer up
2
Calibrate Z-Offset
Insert the print bed and magnetic mat.
Open the menu
Tools
.
Touch the button
Preheating
to start the pre-
heating process.
Wait until the preheat temperature has been reached.
Open the menu
Manual
.
Touch to move the extruder to its zero posi
-
tion.
Activate the Z-offset calibration with the slider.
Touch the distance increment
0.1 mm
to
activate it.