b) (Rechargeable) batteries
• Correct polarity must be observed while inserting the battery.
• To prevent battery leakage, remove the battery when you do not plan to use the
product for an extended period.
• Leaking or damaged batteries can cause burns if they come into contact with
your skin. For this reason, always wear suitable protective gloves when handling
damaged batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
batteries lying around, as there is a risk that children or pets may swallow them.
•
Batteries must not be dismantled, short-circuited or thrown into open flames.
Never recharge non-rechargeable batteries. Risk of explosion!
Product overview
4
3
6
7
5
1
2
1 Scroll wheel
2 MicroUSB charging port
3 Right click
4 DPI button
5 LED light
6 Left click
7 Desktop button
Installing the battery
• Remove the battery compartment cover on the underside of the mouse.
• Ensure the correct polarity when inserting the battery supplied. Pay attention to the polarity
markings inside the battery compartment.
• Close the battery compartment.
Charging the battery
Never recharge non-rechargeable batteries. This may cause a fire or explosion!
Only use battery supplied or other suitable rechargeable batteries of type 14500.
•
Recharge the battery or insert a new battery when scroll LED light starts flashing when you
are using the mouse.
• To do this, connect the micro USB charging port
(2)
to a suitable USB power source
(max. 5 V / 1 A). Use the micro USB charging cable included in the delivery.
When the charging process is complete, the scroll blue LED light is off.
The charging time is approx. 2 hours.
Setup
• The range of the mouse is max. 10 m. Sources of interference such as interfering
frequencies, walls, etc. can reduce the range.
• The mouse's optical motion sensor may not work on some surfaces. In particular, functions
will not work on reflective surfaces or glass.If you have problems with movement of the
mouse pointer, try using a suitable mouse pad.
Please note that the mouse may leave marks on delicate surfaces.
Establishing a connection to the mobile device
a) via Bluetooth:
The mouse supports 2 Bluetooth channels for connection to different devices.
• Turn on the mouse by sliding the switch
on
off
on the underside of the mouse to the "on"
position.
• Press the mode button on the underside of the mouse until the LED integrated in the scroll
wheel
(1)
:
- lights up green when selecting Bluetooth Channel 1
- lights up blue when selecting Bluetooth Channel 2
• Press the Mode button again for a few seconds to activate pairing mode.
• Activate Bluetooth on the device, search for the mouse (Bluetooth device name:
BT MOUSE3.0 or BT MOUSE5.0)
Operating instructions
2.4 GHz + Bluetooth 5.0 rechargeable mouse
Item No. 2372772
Intended use
The product serves as a means of controlling a computer or mobile device. The commands are
transmitted wirelessly via Bluetooth or via radio.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture
(e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. If you use the
product for purposes other than those described above, it may be damaged. In addition,
improper use can cause hazards such as a short circuit or fire. Read the operating instructions
carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Mouse
• USB Receiver
• Rechargeable battery, type 14500
• Charging cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/
downloads or scan the QR code. Follow the instructions on the website. The
operating instructions for this product can also be downloaded from this link.
Description of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Safety information
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become
a dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
•
Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
•
Maintenance, modifications and repairs must be carried out by a technician or
a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
• Attention, LED light:
- Do not look directly into the LED light.
- Do not look into the beam directly or with optical instruments!
