8.1
Item
Part number
Description
RMP40
A-5480-8504
RMP40 probe with batteries, tools and support card (factory-
set to radio on / radio off, trigger filter off).
RMP40M module
A-5628-0001
RMP40M module with batteries, tools and support card
(factory-set to radio on / radio off, trigger filter off).
Battery
P-BT03-0007
½
AA battery – lithium-thionyl chloride (two required).
Stylus
A-5003-3709
PS3-1C ceramic stylus 50 mm long with Ø6 mm ball.
Probe tool kit
A-4071-0060
Kit comprising Ø1.98 mm stylus tool,
2.00 mm A/F hexagon key and shank grub screw (× 6).
Battery cassette
A-4071-1166
Battery cassette assembly.
Battery gasket
A-4038-0301
Battery cap gasket kit.
RMI
A-4113-0050
RMI (side exit) with 15 m (49.2 ft) cable, tools and support
card
RMI-Q
A-5687-0050
RMI-Q (side exit) with 15 m (49.2 ft) cable, tools and support
card
Mounting bracket
A-2033-0830
Mounting bracket with fixing screws, washers and nuts.
Styli tool
M-5000-3707
Tool for tightening/releasing styli.
LP2
A-2063-6098
LP2 probe.
LPE1
A-2063-7001
LPE1 extension bar – 50 mm long.
LPE2
A-2063-7002
LPE2 extension bar – 100 mm long.
LPE3
A-2063-7003
LPE3 extension bar – 150 mm long.
MA4
A-2063-7600
MA4 90° adaptor assembly.
Publications.
These can be downloaded from our website at
www.renishaw.com
.
RMI-Q
H-5687-8504
Installation guide: for the set up of the RMI-Q
Styli
H-1000-3200
Technical specifications guide:
Styli and accessories
– or visit
our Web shop at
www.renishaw.com/shop
.
Probe software
H-2000-2298
Data sheet:
Probe software for machine tools – programs and
features.
Taper shanks
H-2000-2011
Data sheet:
taper shanks for machine tool probes
.
Parts list
Section 8,“Parts list”
