ATOM DX
linear installation guide
6
Support
dowels
Location ledge
RTLF tape scale: Mounting
(for lengths <500 mm only)
4
3
Locate scale against dowels or ledge
and rotate down onto substrate.*
1
Thoroughly clean and
degrease the substrate
with a lint-free cloth.
2
Remove backing paper from scale.
or
Install datum clamp, end covers and
deselect reference marks as
detailed on
.
6
Remove temporary dowels (if fitted).
7
5
Clean scale using Renishaw scale cleaning wipes
(A-9523-4040) or a clean, dry, lint-free cloth.
*
If dowels or ledge are permanent, their maximum
height above substrate is 0.6 mm.