Renfert SYMPRO, Manual

Page: 22 / 452

en
- 4 -
► Risk of injury!
Risk of injury if the components used are not approved.
Always use original Renfert components.
► Please observe the national accident prevention regulations!
► It is the responsibility of the operator that national regulations during operation and regarding a
repeated safety inspection of electrical equipment are complied with. For Germany these are the
regulation 3 by DGUV (German Statutory Accident Insurance) in relation with VDE 0701-0702
(Association for Electrical & Electronic Technology).
► Information on REACH and SVHC is available on our website www.renfert.com, in the Support
area.
2.5.2 Specific Information
► Cleaning pins contain a slight amount of nickel
(see product data sheet).
► Rinse the object under running water after cleaning and disinfect.
► Check the object after cleaning and remove any adhering cleaning pins.
► Contact with cleaning fluids or prolonged inhalation of their vapours may cause irritation.
Use appropriate personal protective gear (protective goggles, gloves).
Please note the information contained within the Material Safety Data Sheet.
► Please do not let the cleaning beaker filled with cleaning fluid in the unit for a long period of time
(e.g. overnight).
► Damage or discolouration may occur should the cleaning liquid come into contact with other
objects or laboratory furniture.
This is valid particularly for surfaces out of PVC, linoleum, marble, natural stone, artificial stone,
stainles steel and wooden surfaces.
In case of contamination, immediate team with a copious amount of water.
► Increased cleaning times in the unit may cause the cleaning liquid to heat up. Use tweezers only
to remove the cleaning object.
► The appliance contains strong magnets!
People with cardiac pacemakers should keep 50 cm from the appliance.
Do not place data storage mediums, credit cards or watches in the vicinity.
► The retaining magnet (Fig. 1, Pos. 5) contains contains lead.
2.6 Information about electromagnetic compatibility (EMC)
Information about electromagnetic compatibility (EMC) can be found in a separate section at the end of
these instructions�
2.7 Authorized Persons
Operation and maintenance of the device may only be performed by qualified personnel.
Any repairs not specifically described in these operating instructions may only be carried out by a quali
-
fied electrician.
2.8 Disclaimer
Renfert GmbH is not liable for claims for compensation or claims under guarantee if:
► the object to be cleaned will be damaged by incorrect treatment.
► the product is used for purposes other than those stated in the operating instructions.
► the product is modified in any way – apart from modifications described in the operating instruc -
tions.
► the product has not been repaired by a specialist firm or original Renfert replacement parts have
not been used.
► there is continued use of the product despite obvious safety defects or damage.
► the product has been subjected to mechanical knocks or has been dropped.
- 4 -