Renfert SILENT TC, Translation Of The Original Instructions For Use

Page: 29 / 242

EN
2.5.2 Specific Information
► The mains socket on the device is only designed for purposes specified in the operating instruc -
tions. Connecting other devices may cause material damage.
► Switch off the electrical device before connecting an electrical appliance to the appliance outlet.
► Read the operating instructions for the electrical appliance which is to be connected and observe
the stipulated safety instructions.
► Please observe the national regulations and permitted exposure to dust in a working environment.
Please ask the “National Institute for Occupational Safety and Health” or other responsible au-
thority.
► Always refer to the relevant safety data sheets, when extracting hazardous materials.
► Always wear protective gear, when extracting hazardous materials.
► It is necessary to wear suitable personal protective equipment when emptying the dust drawer or
cleaning, depending on the type of extracted material.
► When disposing of the extracted material or used filter, please observe the local specifications
and accident prevention regulations!
► Make sure the dust drawer is fully closed during operation.
► Do not operate without a suction hose.
► Do not extract flammable or explosive gasses, fumes or dust.
► Do not extract hot materials.
► Do not extract liquids.
► If the dust extractor is employed to extract hazardous materials, appropriate personal protective
gear must be worn and steps must be taken to ensure that the exhaust air is properly ventilated.
Please refer to the associated safety data sheets for specific requirements.
► Dispose of extracted material according to local statutory regulations.
2.6 Authorized Persons
Operation and maintenance of the device may only be performed by qualified personnel.
Minors and pregnant women may only operate and service the device if they are wearing appropriate
protective gear, in particular if the device is being used to extract hazardous materials�
Any repairs not specifically described in these operating instructions may only be carried out by a quali -
fied electrician.
2.7 Disclaimer
Renfert GmbH shall be absolved from all claims for damages or warranty if:
► The product is employed for any purposes other than those specified in the operating instruc -
tions.
► The product is altered in any way other than those alterations described in the operating instruc-
tions.
► The product is not repaired by an authorized facility or if non-original Renfert parts are implement-
ed.
► The product continues to be used despite obvious safety faults or damage.
► The product is subjected to mechanical impacts or is dropped.
- 5 -