Quick Start Instructions
To power up the YLCDRX63NE, take the male barrel jack connector from the AC/DC Power Adapter
and insert it into the female barrel jack (J101) on the bottom side of the YLCDRX63NE.
Now at the top right corner of the bottom side of the YLCDRX63NE
combo, there’s a switch (S201)
which controls the power to the YLCDRX63NE. Ensure that this is the switch is in the ON position as
shown
by pushing the switch gently away from the connector labeled RS485/CAN that’s below it.
The YDBENETPMOD/YLCDRX63N combo is now ready to power up. Plug the AC/DC Power
Adapter into an outlet, then wait a moment and the two ABOUT and HOME screens should appear in
sequence (See photos on Back).
You have now successfully powered up your YDBENETPMOD/YLCDRX63N combo.
For further instructions on how to use the Demo programs and develop your own projects, please
proceed to
http://am.renesas.com/ddlcd+comm
Power
Jack
