background image

 

IMPORTANT INFORMATION 

READ FIRST 

• READ this user's manual before using this user system interface board. 

• KEEP the user's manual handy for future reference. 

Do not attempt to use the user system interface board until you fully understand its 
mechanism. 

User System Interface Board: 

     Throughout this document, the term "user system interface board" shall be defined as the 
following product produced only by Renesas Technology Corp. excluding all subsidiary products. 

 

User system interface board (HS1650ECN60H) 

     The user system or a host computer is not included in this definition. 

Purpose of the User System Interface Board:  

     This user system interface board is for connecting the evaluation chip board and user system.  
This user system interface board must only be used for the above purpose. 

Improvement Policy:  

     Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as 
Renesas) pursues a policy of continuing improvement in design, performance, functions, and 
safety of the user system interface board.  Renesas reserves the right to change, wholly or 
partially, the specifications, design, user's manual, and other documentation at any time without 
notice. 

Target User of the User System Interface Board:  

     This user system interface board should only be used by those who have carefully read and 
thoroughly understood the information and restrictions contained in the user's manual. Do not 
attempt to use the user system interface board until you fully understand its mechanism. 

     It is highly recommended that first-time users be instructed by users that are well versed in the 
operation of the user system interface board. 

Summary of Contents for User System Interface Board HS1650ECN61H




























Reviews: