Renesas Smart Analog IC101, Application Note

Page: 2 / 21

Smart Analog IC101 Smart Analog Easy Starter 101 Tutorial (RL78/L13)
R21AN0011EJ0100 Rev.1.00 Page 2 of 18
Nov 01, 2014
1. What You Will Need
You will need to prepare the following software and hardware environments to perform the setup described in this
application note.
Table 1-1 Requirements
Item Description
Boards

Renesas Starter Kit for RL78/L13 [R0K5010WMS900BE] CPU Board
(herein referred to as
“RSK CPU board”)

Smart Analog IC RSK Option Evaluation Board [TSA-OP-IC101]
(herein referred to as
“TSA-OP-IC101 board”)
Pin headers
2.54 mm pitch/straight 2 x 13 pin (26P) ---------- 2 pins

for TSA-OP-IC101 board
2 x 12 pin (24P) ---------- 2 pins

for TSA-OP-IC101 board
2 x 25 pin (50P) ---------- 1 pin

for TSA-OP-IC101 board
Note
Pin sockets
2.54 mm pitch/straight 2 x 13 pin (26P) ---------- 2 pins

for RSK CPU board
2 x 12 pin (24P) ---------- 2 pins

for RSK CPU board
2 x 25 pin (50P) ---------- 1 pin

for TSA-OP-IC101 board
Note
Jumper socket
2.54 mm pitch 2 pins ---------- 7 pins

for TSA-OP-IC101 board
Debugger Renesas Electronics on-chip debugging emulator
E1 (R0E000010KCE00)
Flash programming tool Renesas Electronics
Renesas Flash Programmer
Smart Analog evaluation GUI
Analog circuit design tool Smart Analog Easy Starter 101
SA_Easy_Starter_101_Ver2.1.zip
Firmware Hex file for Easy Starter 101
RL78TSA-OP-IC101_Hex.zip
Connection cable RS-232C cable or serial cable for D-SUB 9 pin
AC adapter Plug diameter: 2.1 mm; Center Plus DC 5V
Note: For connecting LCD extension board (Renesas Starter Kit LCD Application Board V2). As Easy Starter 101 does
not use the LCD extension board, confirmation is not necessary unless other operations require it.