Smart Analog IC101
Smart Analog Easy Starter 101 Tutorial (RL78/L13)
R21AN0011EJ0100 Rev.1.00
Page 15 of 18
Nov 01, 2014
7.4
Operation Confirmation
Use the thermistor to confirm that the board and Easy Starter 101 are operating correctly.
First, click
Graph
in the Main window frame to display the ADC Graph window.
Figure 7-8
ADC Graph Window Display
Next, click
Run
in the Main window frame to display conversion frequency waveforms in the ADC Graph window. At
this point, hold the thermistor on the TSA-OP-IC101 board between your fingers, and then let go. This allows you to
visually confirm the change in waveform on the CH2 graph in the ADC Graph window.
Figure 7-9
Operation Confirmation
Thermistor
Hold thermistor
between fingers
Release hold on
thermistor