SMARC EVK of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L, and RZ/Five
Start-up Guide
R01US0556EJ0102 Rev.1.02
Page 8 of 37
Jun. 17, 2022
1.2
Startup Procedure
Hereafter, RZ/V2L Evaluation Board Kit PMIC version picture is used as a representative. If you use RZ/G2L,
RZ/G2LC, RZ/G2UL, and RZ/Five Evaluation Board Kit PMIC version, you can use Connectors on same location as
RZ/V2L Evaluation Board Kit PMIC version.
1.2.1
Power supply
1.
Connect USB-PD Power Charger to USB Type-C Connector (CN6).
2.
LED1(VBUS Power ON) and LED3 (Module PWR On) lights up.
3.
Press the power button(SW9) to turn on the power.
Note: When turn on the power, press and hold the power button for 1 second.
When turn off the power, press and hold the power button for 2 seconds
4.
LED4(Carrier PWR On) lights up.
2. LED1 and LED3 will be light up
1. Connect USB Type-C cable to CN6
Connect USB Type-microAB cable
to CN14 for SCIF download
