Renesas RX231, User Manual

Page: 4 / 34

R12UZ0012EG0110 Rev. 1.10 Page 4 of 34
Apr 03, 2017
How to Use This Manual
1. Purpose and Target Readers
This manual is designed to provide the user with an understanding of the demonstration application, how to use
e
2
studio IDE to develop and debug software for the Hear-it! Solution Kit. It is intended for users designing code
on the Hear-it! Solution Kit, using the many different incorporated peripheral devices.
The manual comprises of step-by-step instructions to load and debug a project in e
2
studio, but does not intend
to be a complete guide to software development on the Hear-it! Solution Kit. Further details of the RX231
microcontroller may be found in the RX231 Group Hardware Manual and within the provided demonstration
code.
Particular attention should be paid to the precautionary notes when using the manual. These notes occur
within the body of the text, at the end of each section, and in the Usage Notes section.
The revision history summarizes the locations of revisions and additions. It does not list all revisions. Refer
to the text of the manual for details.
The following documents apply to the Hear-it! Solution Kit. Make sure to refer to the latest versions of these
documents. The newest versions of the documents listed may be obtained from the Renesas Electronics Web
site.
Document Type Description Document Title Document No.
Quick Start Guide Provides simple instruction to
setup the solution kit and run
the first sample. Quick Start Guide R12QS0007EG
Schematics Full detail circuit schematics
of Hear-it! Hear-it! Solution Kit
Schematics R01UH0692EG
Hardware Manual Provides technical details of
the RX231 MCU. RX230 Group, RX231
Group User’s Manual:
Hardware R01UH0496EJ
BSP FIT application
note Provides technical details of
how to integrate and use the
BSP FIT module. Board Support Package
Module Using Firmware
Integration Technology R01AN1685EJ
DMACA FIT
application note Provides technical details of
how to integrate and use the
DMACA FIT module. DMA Controller DMACA
Control Module Using
Firmware Integration
Technology R01AN2063EJ
CMT FIT
application note Provides technical details of
how to integrate and use the
CMT FIT module. CMT Module Using
Firmware Integration
Technology R01AN1856EU