RX72T CPU Card
User’s Manual
R12UZ0031EJ0100 Rev.1.00
Page 11 of 29
Feb. 21, 2019
5. Usage
5.1
Quick Start
5.1.1
Preparation
Obtain the Motor RSSK, and perform the steps described in 5.1.1 and 5.1.2, Quick Start, of the user’s manual.
(R20UT3697EJ).
5.1.2
Replacing the CPU card
Confirm that the INV-BRD is powered off, remove the RX23T-CRD from the INV-BRD, and connect the product in its
place.
(1) Remove RX23T-CRD
(2) Make sure the inverter board
connectors are correctly aligned,
and attach RX72T CPU card
INV-BRD
RX23T-CRD
RX72T CPU card
Figure 5.1 CPU card replacement
5.1.3
Preparation for Operation Test
Perform the steps described in 5.1.3 to 5.1.5 of the Motor RSSK user’s manual (R20UT3697EJ) to prepare for motor
drive.
5.1.4
Operation Test
Perform the steps described in 5.1.6 to 5.1.9 of the Motor RSSK user’s manual (R20UT3697EJ) in the order indicated,
turn on the power supply, enable motor rotation, change the motor rotation speed, and stop motor rotation.
5.1.5
Finishing the Operation Test
After the operation test is finished, confirm that the motor shaft is no longer rotating and turn off the stabilized power
supply output.
