Emulation Adapter
Appendix A Specifications of the Exchange Adapters
R20UT5180EJ0110 Rev. 1.10
Page 42 of 63
Sep.12.22
Appendix A Specifications of the Exchange Adapters
(1) Overview
An exchange adapter is an adapter board that connects the emulation adapter to the pad pattern for the
target device.
The following describes the specifications of the RTE7702510CBG468T000J,
RTE7702520CBG468T000J, or RTE7702540CBG468T000J exchange adapter for the 468-pin BGA
package, the RTE7702510CBG373T000J, RTE7702520CBG373T000J, or RTE7702540CBG373T000J
exchange adapter for the 373-pin BGA package, and the RTE7702540CBG292T000J exchange
adapter for the 292-pin BGA package.
(2) List of Packages and Sockets
Refer to Table 3-3 for the exchange adapters and type names of sockets for the packages of the target
devices. The BSSOCKET target connector, CSSOCKET space adapter, and LSPACK mount adapter
can be purchased from Tokyo Eletech Corporation. If you particularly require details on the CSSOCKET
space adapter, contact Tokyo Eletech Corporation.
(3) Number of insertions and removals of the connector
The connector is guaranteed for correct insertion and removal 100 times.
(4) How to use the emulation adapter
The emulation adapter can be connected to the target system via the exchange adapter through the
following procedure. Align the positions of pin 1 as shown in Figure A-1.
1. Mount the target connector (BSSOCKET) on the target system.
2. Connect the exchange adapter to the emulation adapter.
3. Connect the exchange adapter to the target connector (BSSOCKET).
If adjustment of the height is required, use the space adapter (CSSOCKET).
Confirm that the contact pins are not bent.
