RL78/G1P
CHAPTER 5 CLOCK GENERATOR
R01UH0895EJ0100 Rev.1.00
110
Nov 29, 2019
5.3.8 High-speed on-chip oscillator trimming register (HIOTRM)
This register is used to adjust the accuracy of the high-speed on-chip oscillator.
With self-measurement of the high-speed on-chip oscillator frequency via a timer using high-accuracy external clock
input (timer array unit), and so on, the accuracy can be adjusted.
The HIOTRM register can be set by an 8-bit memory manipulation instruction.
Caution The frequency will vary if the temperature and V
DD
pin voltage change after accuracy adjustment.
When the temperature and V
DD
voltage change, accuracy adjustment must be executed regularly or
before the frequency accuracy is required.
Figure 5-10. Format of High-Speed On-Chip Oscillator Trimming Register (HIOTRM)
Address: F00A0H After reset:
Note
R/W
Symbol
7 6 5 4 3 2 1 0
HIOTRM
0
0
HIOTRM5 HIOTRM4 HIOTRM3 HIOTRM2 HIOTRM1 HIOTRM0
HIOTRM5 HIOTRM4 HIOTRM3 HIOTRM2 HIOTRM1 HIOTRM0 High-speed on-chip
oscillator
0 0 0 0 0 0 Minimum speed
0 0 0 0 0 1
0 0 0 0 1
0
0 0 0 0 1 1
0 0 0 1
0 0
1 1 1 1 1 0
1 1 1 1 1 1
Maximum
speed
Note
The value after reset is adjusted at shipment.
Remarks 1.
The HIOTRM register can be used to adjust the high-speed on-chip oscillator clock to an accuracy
within about 0.05%.
2.
For the usage example of the HIOTRM register, see the application note for RL78 MCU Series High-
speed On-chip Oscillator (HOCO) Clock Frequency Correction (R01AN0464).
Summary of Contents for RL78/G1P
Page 770: ...RL78 G1P R01UH0895EJ0100 ...
