R0E521000CPE00 User’s Manual
3. Usage (How to Use the Emulator Debugger)
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 51 of 92
3.1.2 MCU Setting Dialog Box
The MCU Setting dialog box is used to set the user target information. It is displayed after you closed the Init dialog box.
(1) MCU tab
1) Specifying the processor mode
Specifying the processor mode
Select the appropriate processor mode that suits your system. For
the R8C Family, you can specify only the Single-chip Mode.
2) Referencing the MCU pin status
Referencing the MCU pin status
This column shows the state of each MCU pin. For the R8C
Family, however, it does not show the MCU pin state.
