FemtoClock®2 GUI User Guide
R31US0004EU0100 Rev.1.0
Apr 22, 2021
Page 17
11. Common Configurable Settings
11.1 Changing the I2C Device Address
1. Enter the configuration view.
2. Type “I2C” into the search bar.
3. Change the ‘TOP.SSI.I2C_ADDR_CNFG.i2c_addr’ setting to the desired address.
11.2 Disabling the Internal Input and Output Terminations
11.2.1. Disabling Input Terminations
1. Go to the block diagram view.
2. Click on the
Inputs
block.
3. Enable/Disable the terminations under the “Terminations” header.
