FemtoClock®2 GUI User Guide
R31US0004EU0100 Rev.1.0
Apr 22, 2021
Page 16
9. Device Connection
Device connection can be done through the bottom right corner of every page. To connect one of the Renesas
evaluation boards, ensure the device is powered and connected to the working computer. Then, click the
Not
Connected
button in the corner of the screen. This will lead to a small pop-out page. Click the connect symbol in
the corner of the page to establish a connection to the device.
See the
Evaluation Board User Manual
for more information regarding device connection. This manual is located
on the
10. Errors and Warnings
When adjusting the values in the configuration, errors or warnings may arise. These are used to help users stay
within the limitations of the device and give recommendations to how to configure it. Errors must be cleared
before writing to the device.
The bottom right corner of the screen shows how many errors or warnings have occurred. Click on either one to
view the contents.
