Renesas Emulator System M3T-MR100, User Manual

Page: 266 / 306

250
8.1.3 Configuration File Example
The following is the configuration file example.
1 ////////////////////////////////////////////////////////////////////////////////
2 //
3 // kernel.cfg : building file for MR100 Ver.1.00
4 //
5 // Generated by M3T-MR100 GUI Configurator at 2007/02/28 19:01:20
6 //
7 ////////////////////////////////////////////////////////////////////////////////
8
9 // system definition
10 system{
11 stack_size = 256;
12 sys
ﾃ
m_IPL = 4;
13 message_pri = 64;
14 timeout = NO;
15 task_pause = NO;
16 tick_nume = 10;
17 tick_deno = 1;
18 };
19
20 // max definition
21 maxdefine{
22 max_task = 3;
23 max_flag = 4;
24 max_sem = 3;
25 max_dtq = 3;
26 max_mbx = 4;
27 max_mpf = 3;
28 max_mpl = 3;
29 max_cyh = 4;
30 max_alh = 2;
31 };
32
33 // system clock definition
34 clock{
35 timer_clock = 20.000000MHz;
36 timer = A0;
37 IPL = 3;
38 };
39
40 task[]{
41 entry_address = task1();
42 name = ID_task1;
43 stack_size = 256;
44 priority = 1;
45 initial_start = OFF;
46 exinf = 0x0;
47 };
48 task[]{
49 entry_address = task2();
50 name = ID_task2;
51 stack_size = 256;
52 priority = 5;
53 initial_start = ON;
54 exinf = 0xFFFF;
55 };
56 task[3]{
57 entry_address = task3();
58 name = ID_task3;
59 stack_size = 256;
60 priority = 7;
61 initial_start = OFF;
62 exinf = 0x0;
63 };
64
65 flag[]{
66 name = ID_flg1;
67 initial_pattern = 0x00000000;
68 wait_queue = TA_TFIFO;
69 clear_attribute = NO;
70 wait_multi = TA_WSGL;
71 };
72 flag[1]{
73 name = ID_flg2;
74 initial_pattern = 0x00000001;