Renesas Emulator Debugger M16C PC4701, User Manual

Page: 277 / 296

12 Attention
263
12. Attention
12.1 Common Attention
12.1.1 File operation on Windows
1. File Name and Directory Name
-
Operation is not guaranteed if your directory names and filenames include kanji.
-
Use only one period in a filename.
2. Specify the File and Directory
-
You cannot use "..." to specify two levels upper directories.
-
You cannot use a network pathname. You must allocate a drive.
12.1.2 Area where software breakpoint can be set
The area which can be set for software breakpoint varies depending on the type of MCU.
12.1.2.1 The debugger for M32C
The area which can be set for software breakpoint varies depending on the processor mode.
Processor Mode Can be set area
Single Chip Internal RAM, Internal ROM
Memory Extension Internal RAM, Internal ROM
Emulation memory (Only the Internal area)
Micro Processor Internal RAM
Emulation memory (Only the Internal area)
To stop the target program outside the emulation memory area, use the Come execution.
12.1.2.2 The debugger for M16C/R8C
The RAM / ROM area memory-mapped in the area set as Internal can be designated for software
breakpoint.