Operator’s Guide
Auto To/Auto From Mode
Version 3 Software for the Gray|328 adds a very powerful feature called
Auto To/Auto From mode where the mixer will automatically assign inputs
to fader channels via the edit system. This adds the ability to access all
32 inputs of the mixer without having to re-assigning inputs to faders.
With Auto To/From, when an edit systems sends out a TO or FROM
command the Gray|328 will automatically assign those inputs associated
with the command to the mixers fader channels. Since each input pair
has a crosspoint number associated with it, a single crosspoint number
can control one or more input pairs.
Note
Auto To/Auto From mode only operates on input pairs (2-channels). For
editing of individual channels manual assign the inputs to the faders.
Refer to “Appendix B: Assigning Single Channels“ on page 109 for
additional information regarding assigning single channels.
Assigning Auto To/Auto From channels
This procedure describes how to assign either a Auto To or a Auto From
channel to a fader. Refer to “Making Fader Input Assignments“ on page
53 for assigning inputs to faders.
1.
Press the Select button for the desired fader. The Select button's LED
lights up.
Figure 112. Fader Select Buttons
ESAM II Control
Page 95