Renegade Labs Gray|328
Note
When a mode is changed to any state other than NORMAL a warning
message will be displayed on the Status LCD when that mode is
attempted to be changed from the panel.
Mode states are stored in memory registers.
Adjusting the Headphone Output
The Headphone Menu allows you to choose which program outputs are
monitored at the headphone output (output routing). This menu also
allows you to adjust the level of the headphone output.
Selecting Headphone Output Routing
You can choose what to monitor with the headphones. Selection is done
using the Headphone Menu in conjunction with the Multi-Function
Keypad. The Multi-Function Keypad is used to make the routing
selections.
On the left side of the Headphone Menu, the Matrix represents routing of
program buses to the headphones. In the example below, the
headphones are monitoring Program buses 1 and 2.
Figure 37. Headphone Menu, Default Routing
Note that the layout of the Multi-Function Keypad corresponds to the
Matrix diagram in the Headphone Menu. The lighted pushbuttons show
current selections just as the darkened portions of the Matrix do. In the
figure, the lighted button pattern indicates the same default selections as
shown in the example Headphone Menu.
Page 38
System Adjustments and Information Display
