Renegade Labs Gray|328
Monitor Control Section
Figure 5. Monitor Control Section
The Monitor controls allow you to precisely configure your monitoring
environment.
Monitor Knob
The Monitor Knob is for setting the monitor output level. Turning the knob
clockwise raises the output level; turning the knob counterclockwise
lowers the output level.
Calibration LED
The Calibration LED indicates when the monitor output level is at unity.
The Monitor Knob's reference indicator line also points at the Calibration
LED when at unity.
MUTE button
The MUTE button mutes all eight monitor outputs when pressed.
Pressing the MUTE button again un-mutes the monitor outputs. The
Monitor Mode menus displays the status of monitor output mutes. Refer
to “Setting up the Monitor Mode“ on page 75 for more information.
MODE Button
The MODE button allows you to select or set up various monitor output
matrix configurations (modes) using the Monitor Mode Menu (See
“Setting up the Monitor Mode” on page 75). The modes determine how
the eight program outputs are routed to the eight monitor outputs.
Page 12
Control Descriptions
