Rendamax R3456 EVO, Manual, Page: 21 / 72

Norms and regulations
General regulations
Application
Norms and regulations
Additional national standards
Additional national standards
Germany:

RAL - UZ 61 / DIN 4702-8
Switzerland:

SVGW
Austria:

Kurzgutachten 15a V-BG
Belgium:

NOx certification
France:

Arrête du 02 Aout 1977 - 300mbar
gas pressure with accessories kit
(only R3500 EVO and R3600 EVO)
Italy:

Star level certification
“Legge 10” 1991
This boiler is CE approved and applies
to the following European standards:

2016/426/EEC Gas appliances
regulation.

92/42EEC Efficiency diractive

2009/142/EEC Gas appliance
directive.

2004/108/EEC EMC directive.

2006/95/EEC Low voltage
directive.

EN 15502-1 Gas-fired central
heating boilers –Part 1:General
requirements and tests.

EN 15502-2-1 (Gas-fired central
heating boilers –Part 2-1: Specific
standard for type C appliances and
type B2, B3 and B5 appliances of a
nominal heat input not exceeding
1000 kW).

EN 55014-1 Electromagnetic
compatibility- Requirements for
household appliances, electric
tools and similar apparatus - Part
1: Emission.

EN 55014-2 Electromagnetic
compatibility- Requirements for
household appliances, electric
tools and similar apparatus - Part
2: Immunity - Product family
standard.

EN 61000-3-2 Electromagnetic
compatibility (EMC) - Part 3-2:
Limits - Limits for harmonic current
emissions (equipment input current
16 A per phase).

EN 61000-3-3 Electromagnetic
compatibility (EMC) - Part 3-3:
Limitation of voltage changes,
voltage fluctuations and flicker in
public low voltage supply systems,
for equipment with rated current 16
A per phase and not subject to
conditional connection.

EN 60335-1 Household and
similar electrical appliances -
Safety - Part 1: General
requirements.

EN 60335-2-102 Household and
similar appliances - Safety - Part 2-
102: Particular requirements for
gas, oil and solid-fuel burning
appliances having electrical
connections.

EN 50165 Electrical equipment of
non-electric appliances for
household and similar purposes.
Safetyrequirements.

EN 12828 / DIN 4751-2 Heating
systems in buildings - Design for
water-based heating systems /
Medium temperature hot water
systems (mthws) with a boiler flow
temperature up to 120°C -
specifcation for sealed systems
using thermostatic control - safety
equipment.
General regulations
This documentation contains
important information, which is a base
for safe and reliable installation,
commissioning and operation of the
boiler. All activities described in this
document may only be excecuted by
authorized companies.
Changes to this document may be
effected without prior notice. We accept
no obligation to adapt previously
delivered products to incorporate such
changes.
Only original spare parts may be used
when replacing components on the
boiler, otherwise warranty will be void.
Application
The boiler may be used for heating and
hot water production purposes only.
The boiler should be connected to
closed systems with a maximum
temperature of 100 °C (high limit
temperature), maximum setpoint
temperature is 90 °C.
Norms and regulations
When installing and operating the
boiler, all applicable norms (European
and local) should be fulfilled:
Local building regulations for installing
combustion air and flue gas systems;
Regulations for connecting the boiler to
the electrical appliance;
Regulations for connecting the boiler to
the local gas network;
Norms and regulations according to
safety equipment for heating systems;
Any additional local laws/regulations
with regard to installing and operating
heating systems.
20