Rendamax E8.1121, Operating Instructions Manual, Page: 9 / 44

Overview of display values and
settings
General area
(Select main level using
Ç
and open
with
Ä
)
Date / Time / Holiday
This area contains a series of different
values in order to provide rapid access.
(Select values/value group using
Ç
and open with
Ä
)
!
If a heating system controller has
been set to be the TIME MASTER
(time setting for all controllers, see
EXPERT/INSTALLATION) or a
DCF (Radio time receiver) has
been installed in the system, the
time is blanked out on all the other
controllers in the system.
!
There may be a time difference of
up to 2 minutes per month (correct
time if necessary). If a DCF
receiver is connected the correct
time is always displayed.
The current weekday is calculated
automatically. Checking can take place
using the selectable additional display
in the standard display => set to "Day"
It is possible to change from summer
to winter time by entering the date.
Date/time => Value group
(General -> Date/Time/Holiday level)
All the values in this group are set in sequence
=> adjust using
Ç => continue with Ä
TIME
(Minutes) Current minutes blink and can be ad-
justed
TIME
(Hours) Current hours blink and can be ad-
justed (seconds are set to "00" when
stored)
YEAR Adjust current year
MONTH Adjust current month
DAY Adjust current day (date)
~ Hinged cover OPEN Î search for level to the left with Ç , open with Ä
9
Operation
Overview of display values and settings
Holiday => Value group
(General -> Date/Time/Holiday level)
All the values in this level are set in sequence
=> adjust using
Ç
=> continue with
Ä
YEAR START Set current holiday start year
MONTH START Set current holiday start month
DAY START Set current holiday start day
YEAR STOP Set current holiday end year
MONTH STOP Set current holiday end month
DAY STOP Set current holiday end day
!
Please do not enter the day of
travel as the start date, but the first
day of the holiday (no more heating
from this day).
!
Please do not enter the day of
travel as the end date, but the last
day on which there is to be no
heating. When you arrive home the
house should be warm and there
should be hot water.
!
Stop holiday function => e.g. for
early return by pressing the
program switch.