Rendamax E8.1121, Operating Instructions Manual, Page: 17 / 44

Operation
Overview of display values and settings
Heating circuit I / II
Designation Value range Default IV
MODE
----,
i
,
F
1,
F
2,
B
,
B
- - - -
T-ROOM DES 1*) 5°C - 40°C 20°C
T-ROOM DES 2 5°C - 40°C 20°C
T-ROOM DES 3 5°C - 40°C 20°C
ECONO TEMP*) 5°C - 40°C 10°C
REDUCED TEMP 5°C - 40°C 15°C
T-LIMIT DAY ----, (-5)°C - 40°C 19°C
T-LIMIT N ----, (-5)°C - 40°C 10°C
HEAT SLOPE 0,00 - 3,00 1,20
ADAPTION 00, 01 (OFF/ON) 00 = OFF
ROOMS-INFL 00 - 20 10
ADAP ROOM-T (-5,0)K - (5,0)K 0,0K
OPTIMIZAT 00, 01, 02 00
M-OPT-TIME 0:00 - 3:00 [h] 2:00 [h]
ECONO OPTI 0:00 - 2:00 [h] 0:00 [h]
PC-ENABLE 0000 - 9999 0000
RETURN Exit level using
Ä
~
Hinged cover OPEN Î search for
level to the right with
Ç
, open with
Ä
MODE
- - - - => The controller programming
switch applies in this case.
When setting an operating mode the
mode only applies to the assigned
heating circuit. When the "
i
= Stand-
by/OFF", and "
F
= Summer mode"
controller programming switch
operating modes are set, this has a
reducing effect on all heating circuits
and consumer circuits in the entire
system.
T-ROOM DES 1-3
Required room temperature setting
T-ROOM DES 1
=> used in first enable time,
T-ROOM DES 2
=> used in second enable time,
T-ROOM DES 3
=> used in third enable time of active
heating program for this heating circuit.
ECONO TEMP
Required room temperature setting
during night reduction
REDUCED TEMP
Required room temperature setting
during holidays
*) depending on function selector
Heating circuit POOL-TEMP,
DHW-TEMP, T-FLOW-DAY or
T-FLOW-NIGHT (see page 24)
17