Rendamax E8.1121, Operating Instructions Manual, Page: 16 / 44

Operation
Overview of display values and settings
Hot water
Designation Value range Default IV
1X DHW 00, 01 (OFF/ON) 00 = OFF
DHW-TEMP 1 10°C -70°C 60°C
DHW-TEMP 2 10°C - 70°C 60°C
DHW-TEMP 3 10°C - 70°C 60°C
BOB-VALUE 0K - 70K 0K
CIRCL-P-DHW 00, 01 (OFF/ON) 00 = OFF
ANTILEGION 00, 01 (OFF/ON) 00 = OFF
RETURN
Exit level using
Ä
~
Hinged cover OPEN Î search for
level to the right with
Ç
, open with
Ä
Hot water short time heating
function
ANTILEGION = 01 => Every 20th time
that heating takes place or once per
week on Saturday at 01:00 hrs the
storage tank is heated up to 65°C.
It is possible to set up your own hot
water short time heating function using
the third hot water enable facility.
1X DHW (1x Hot water)
01 => The storage tank is enabled for
charging once
(e.g. for showering outside hot water
times).
Charging starts when the temperature
drops below set temperature
"DHW-TEMP 1" by the switching
hysteresis. After charging, the value is
automatically set to "00".
DHW-TEMP 1-3 (Hot water tempera-
ture setting)
Required hot water temperature setting
DHW-TEMP 1
=> used in first enable time,
DHW-TEMP 2
=> used in second enable time ,
DHW-TEMP 3
=> used in third enable time of hot
water program.
16
BOB-VALUE (Operation Without
Burner)
Energy saving function for solar or solid
fuel integration.
For settings
> "0" the burner is not
activated for hot water preparation until
the hot water temperature has dropped
below the temperature setting by the
set value + the hysteresis.
!
This function may be affected by
alternative energy sources that are
connected via bus (e.g. SD3-Can).
CIRCL-P-DHW (Circulation with hot
water)
01 => The circulation pump runs when
the hot water is enabled, but the
circulation program is disabled.
ANTILEGION (Hot water short time
heating function)
01 => Activation of hot water short time
heating function