G
E T T I N G
S
T A R T E D
Getting Started with the 2Know! Classroom Response System
. . . . .
13
AccelTest
User Manual
Changing a Student’s Personal Identification Number (PIN) for a Responder
1.
On the Responder the student owns, press the
On/Off
button to start the
Responder.
2.
Enter the student’s current PIN and press
Enter
. (The default PIN is
1212
; you
may have changed it or set a different one.)
3.
Press
to scroll down to
Settings
and press
Select
.
4.
Press
to scroll down to
Change PIN
and press
Select
.
5.
The student’s name will appear, and you will be asked to enter a new PIN.
Enter the letters and/or numbers for the new PIN (1–11 characters) and press
ENTER
. The Responder will identify the student owner by name and show the
new PIN.
Displaying a Forgotten Student PIN
If a student owner of a Responder forgets his or her PIN, follow these steps to see
the number:
1.
Press the
On/Off
button to start the Responder.
2.
Press
?
.
3.
If your Receiver name appears, click
yes True
and press
Select
. If more than
one Receiver name appears, scroll to select the correct Receiver; then, press
Select
.
4.
Enter your administrator PIN and press
ENTER
.
5.
The Responder will tell you the device is unlocked, and it will show you the
student’s PIN. Make a note of the forgotten PIN; then, press any key. The
student can use this PIN the next time he or she uses the Responder.
Resetting the Student Owner of a Responder
When you need to reset the owner of a Responder, follow these steps:
1.
Press the
On/Off
button to start the Responder.
2.
Press
?
.
3.
If your Receiver name appears, click
yes True
and press
Select
. If more than
one Receiver name appears, scroll to select the correct Receiver; then, press
Select
.
4.
Enter your administrator PIN and press
ENTER
.
5.
The Responder will tell you the device is unlocked, and it will show you the
student’s PIN. Press any key.
6.
Press
to scroll down to
Settings
; then, press
Select
.
7.
Press
to scroll down to
Reset Owner
; then, press
Select
.
8.
Enter the administrator PIN again and press
ENTER
. The owner will be reset,
so no student will own the Responder. To assign a new owner, see page 11.
Entering the
Administrator PIN:
If
you make a mistake
while entering the
Administrator PIN, you can
press
CLEAR
to start over. To
change the PIN, see page 10.
