http://www.remotecontrol-express.com
Connection of the receiver to the motor:
1.
Unplug your motor.
2.
Check that your receiver is supplied with a 12V or 24V power
by the circuit board of your motor is greater (for example, 220V), you will have to install a
transformer.
3.
Make the following connections with the electric
-
Connect channel 1 betwee
the hole under the screws and then screw them to lock the wire).
-
Connect channel 2 between terminals 7 and 8 on the receiver
connection of this channel is not displa
-
Connect the te of the motor (or terminal with a tension indication) to terminal 5 on
the receiver.
-
Connect the terminal – or GMD of the motor to
4.
Your receiver is connected.
Receiver already in use and to be kept
(example of configuration)
Main receiver card
Programming Manual
express.com
-
TEL :
+44 (0) 207 399 7782 - FAX :
+44 (0) 207 927 3151
MARANTEC D343 – D344
Connection of the receiver to the motor:
Check that your receiver is supplied with a 12V or 24V power supply. If the voltage delivered
by the circuit board of your motor is greater (for example, 220V), you will have to install a
Make the following connections with the electrical wires as indicated in the diagram above
between terminals 2 and 3 on the receiver (you have to insert the wire in
the hole under the screws and then screw them to lock the wire).
Connect channel 2 between terminals 7 and 8 on the receiver (for more clarity, the
connection of this channel is not displayed in the diagram above).
Connect the te of the motor (or terminal with a tension indication) to terminal 5 on
or GMD of the motor to terminal 4 on the receiver
Your receiver is connected.
Receiver already in use and to be kept
(example of configuration)
Main receiver card
+44 (0) 207 927 3151
If the voltage delivered
by the circuit board of your motor is greater (for example, 220V), you will have to install a
indicated in the diagram above:
(you have to insert the wire in
for more clarity, the
Connect the te of the motor (or terminal with a tension indication) to terminal 5 on
on the receiver.
