REMKO KNGcooling module, Installation Instructions Manual

Page: 7 / 24

2 Technical data
2.1 Unit data
Unit type Cooling mode
System
Brine/water,
or water/water
Medium flow rate water (according to EN 14511, at ∆t 5 K) m 3 /h 0.95
Min./max. operating temperature °C 7/95
Max. operating pressure bar 3
Power supply V/Ph/Hz 230/1~/50
Brine-side pressure loss kPa/bar 140/0.14
Heating side pressure loss kPa/bar 140/0.14
WSP 80/110 connections Inches 1", flat-sealing
WSP 140/180 connections Inches 1 1/4", flat-sealing
Cooling mode dimensions
Height mm 450
Width mm 650
Depth mm 150
Technical data for 3-way changeover valve
Cvs value (pressure loss 1 bar)
m
3
/h
7.5
Rated pressure bar 10
Switching time s 8
Medium connectors Inches 1 1/4"
Electrical connection V/Ph/Hz 230/1~N / 50
Power consumption W 5 (4.8 VA max.)
Voltage resistance of the auxiliary contacts A/V 1/250
Permissible environmental temperatures °C 0-55
Min./max. hot water temperatures °C 0-95
Rated pressure gauge DN 25
EDP no. 260072
We reserve the right to modify the dimensions and design as part of the ongoing technical development
process.
7