4
Operation
4
3
2
1
3
2
1
8h
4h
2h
2
1
4
3
5
6
7
8
9
Fig. 9: Control panel
1
"ON/OFF" key
This key switches the unit on and off.
2
“Fan Speed” key
By pressing this key, it is possible to choose
between the fan stages Low (1), Medium (2) and
High (3).
3
"TIMER" key for switch-off delay
The switch-off delay can be activated with this key
when the machine is switched on. It is possible to
select a unit switch-off time delay of 2, 4 and 8
hours.
4
"Auto Fan" key
This key can be used to activate and deactivate
the automatic fan control. When automatic fan con-
trol is activated, the unit automatically selects the
fan speed based on the air quality.
5
“Sleep” night mode key
Pressing this key activates and deactivates night
mode. When night mode is activated, the fan
speed is reduced to a minimum and the control
panel lighting is dimmed.
6
“AQ” air quality display key
Display visualising the quality of the room air. The
colours shown are to be understood as follows:
Red: poor air quality
Orange: average air quality
Green: good air quality
7
“Anion” generator key
This key can be used to activate and deactivate
the anion generator. When the anion generator is
activated, the air purifier produces anions that
attract and bind suspended particles in the air. The
bonded particles can be better separated by the fil-
ters due to their greater mass and increased diam-
eter.
8
“Lock” key
Pressing this key activates the key lock. The key
lock can be deactivated again by holding the key
down.
REMKO
13
