NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO
A POWER SOURCE
© 2018, Pinnacle Climate Technologies,Inc
Carbon Fiber Quartz Radiant Heater
4
Troubleshooting
Problem
Cause
Solution
Do not feel heat.
1. No power to heater.
2. Heater is not on a level
surface
3. Heater does not heat area
in front of heater, it will
disperse heat throughout
room to heat entire space.
1. Check power connections
/ connect heater to power
supply.
2. Heater should be on a
firm surface so the tip over
switch, located on the
bottom of the unit, makes
contact with the floor or
other surface.
3. Heater is operating correctly.
Heater is not oscillating
1. On/Off, Low/High dial is not
set properly
1. Be sure on/off, low/high dial
is set to either or
2. Heater is operating correctly