REMET CNC TECHNOLOGY SP. Z O.O.
Page 14 z 22
Manufacturer of machinery and equipment, CNC machining service
Comments and first aid
1.
Report any accident at work to your supervisor, and leave the workplace in
the condition in which the accident occurred.
2. Always be prepared to get the following equipment:
•
Completely equipped first aid kit easily accessible to the operator and by-
standers.
•
Clean towels and cloths to stop bleeding.
•
A cell phone or other device that allows you to call for help quickly.
•
Do not work alone! There should be a person who knows the first aid prin-
ciples nearby. The assistant must be at a safe distance from the work
area, but should always pay attention to the operator. Use the device only
in places where you can quickly call an ambulance! If an injury occurs,
first aid should be given and, if necessary, further medical assistance
should be sought.
6.
TRANSPORT AND STORAGE OF DEVICES
The device should be transported after coupling with the tractor or on a platform
suitable for this type, before moving or transporting, the loading funnel must be
folded and secured. Never allow anyone to sit or stand on the machine.The de-
vice should be stored out of reach of children in a dry place at 0ºC to + 40ºC.
Before storage, please proceed as follows:
1. Remove all residual material from the machine.
2. Wash the machine thoroughly with pressurized water to remove any
dirt, sludge or sand.
3. Check all rotating parts, remove entangled material if necessary.
4. Run the machine for a few minutes to dry the machine from inside.
5. Lift and lock the drop funnel.
6. Make touch-up patches for scratches and notches to protect against
corrosion.
Summary of Contents for RT-630
Page 22: ......
