REMET CNC TECHNOLOGY SP. Z O.O.
Page 19 of 51
Manufacturer of machinery and equipment, machining
4. Operators are prohibited from moving away from the chipper without first
switching off the engine (in the RS-120 model, when using the PTO drive, switch
off the tractor and remove the key from the ignition).
5.
It is forbidden
to make any adjustments to the chipper or make repairs
while the internal combustion engine is switched on (in the RS-120 model, when
the PTO drive is used, the chipper is coupled with the tractor).
6.
It is forbidden
using the machine with removed or damaged safety devices
such as covers and covers, pouring and ejection funnels and with missing
warning stickers.
7.
It is forbidden
use the device for purposes other than those for which it is
intended.
8.
It is forbidden
using the device while the tractor is moving
9.
It is forbidden
making any changes or modifications to the device, making
changes or modifications results in immediate loss of the warranty. In addition,
the manufacturer is not liable for resulting damage to property and injuries,
death of the operator) resulting from changes or modifications to the device.
Notes and first aid
1.
Report any accident at work to your supervisor, leave the work station in
the condition in which the accident occurred.
3.
Always be prepared. Obtain the following instructions in:
•
A fully equipped first aid kit easily accessible by the operator and
bystanders. The first aid kit should contain an appropriate amount of
dressing for cuts and cut wounds.
•
Clean towels and cloths to stop hemorrhaging.
•
A cell phone or other device that allows you to quickly call for help.
4.
Do not work alone! There should be a person in the vicinity who knows the
rules of first aid. The midfielder must be at a safe distance from the work area,
but he should always pay attention to the operator. Use the device only in places
where you can quickly call an ambulance! If injury occurs first aid should be
given and further medical help should be obtained if necessary.
Summary of Contents for RS-120 OFF-ROAD
