REMEHA CDI4 AD258, Installation, User And Service Manual

Page: 27 / 32

3.
All of the days flash
. The new programme will be active every day
of the week.
To modify the programme for a particular day, press the rotary button
several times until the desired day flashes.
4. Turn the rotary button to the left until
0.00
is displayed. The first
segment of the graphic bar for the timer programme flashes.
5.
b :
Comfort mode selection
Press the
Cx
key. The symbol b is steady, the selection mode for
the comfort time ranges is active.
To select a comfort time range, turn the rotary button to the right.
The zone selected is displayed under
b on the graphic bar.
v :
Reduced mode selection
Press the
Cc
key. The symbol v is steady, the selection mode for
the reduced time ranges is active.
To select a reduced time range, turn the rotary button to the right.
The zone selected is displayed under
v on the graphic bar.
6. To return to the principal display, press the
MODE
key or wait 20
seconds.
3.2.3. Calibrating the room sensor
1. Measure the room temperature with a thermometer.
2. Press key
Cx
and
Vc
simultaneously for 5 seconds.
The symbol
CAL
and the current temperature are displayed.
3. Turn the rotary button to set the room temperature.
Setting is done in steps of 0.1°C. The correction range is between
+ and -5 °C compared with the temperature displayed.
4. To confirm, press the rotary button.
3.2.4. Changing the domestic hot water
temperature
CAUTION
Function available depending on the model of control panel.
In the factory, the domestic hot water temperature is set to 55°C. Setting
can be done from 10 to 80°C in steps of 1°C.
To modify the domestic hot water temperature, proceed as follows:
1. Press the
MODE
and
r
keys simultaneously for 5 seconds. The
1
menu is displayed.
C002436-B
MODE
r
x
0 2 4 6 8 10 12 14 16 18 22 24 20
1 2 3 4 5 6 7
3x
2 3 4 5 6 1 7
C002430-B
5"
x
+
a
A000852-B
MODE
r
x
0 2 4 6 8 10 12 14 16 18 22 24 20
°C
A000857-A
5"
+
MODE
r
AD258 3. Operating instructions
05/03/2015 - 300020558-001-05 27
EN